This machine conditions Lube oil of grade ISO – VG – 46 & ISO
–VG – 68 andenhance the parameters of water content from 2000 ppm
to 5 ppm and separates(removes) the free water, sludge, gas content
and carbon from Lube oil& hydraulic oil.
Whenit starts working, the used oil will be poured into the heater
to heat underthe vacuum pressure, then the heated oil enter into
the primary filter whichwill eliminate the big impurities, then the
oil enter into the vacuumseparator, the oil will flow the special
radiation device, which make theunit/volume oil to produce a large
surface area, lets the pollution oilexposure in the low humidity
atmosphere, thus the water, air and gas can beeliminated. The
treated vapor and gas form the gaseousmixture becomes the liquid
through the water tank and the chiller condensation,then the liquid
enters water receiver together, the vacuum extracts the surplusgas.
The oil which is drained away water flow into precision strainer
where can exhaustparticulates (oil purification). According the
quantity of the water content, awhole purification needs many times
circulation to drain away thewater.
Generally,hydraulic oil is to be maintained at very high quality of
Purification. The Oiloften having large sizes of particles is
passed through coarse type filter, totrap the large sized
particles. Having taken care of micronic and sub-micronicparticles,
it is further finely cleaned by electro-statically,
operatedhydraulic oil cleaner & brought to the international
Theoil restoration machine is used for purifying the various types
of turbine andhydraulic oil used in the machines of the power plant
viz Turbine, Generatorsetc.